+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Rapid Incoming calls not connecting (/showthread.php?tid=13204)
Rapid Incoming calls not connecting - dig1234 - 03-10-2016 12:46 AM
If a second call comes in just after a call was hungup (within 20 seconds), there is no audio and call doesn't fully connect.
This is happening on T41p in STUN/TLS mode on 3cx server with latest v80 frimware. Everything else works great. It is very frustrating.
Any ideas?
RE: Rapid Incoming calls not connecting - Karl_Yealink - 03-10-2016 03:57 AM
How many phones do you have?
How many of them have this problem?
Can you help us to get the pcap and syslog and config.bin files. We can check something from them.
You can know how to do from the FAQ: http://support.yealink.com/faq/faqInfo?id=311
RE: Rapid Incoming calls not connecting - dig1234 - 03-11-2016 11:07 PM
We currently have 5 Yealink phones and they all have the problem. (If we can work out this problem we will deploy to the whole company..)
I have attached the PCAP & logs to an email.
Thanks!
RE: Rapid Incoming calls not connecting - Karl_Yealink - 03-18-2016 04:22 PM
I don't receive your email. Would you please send the email to me(karl@yealink.com) again.
Note that you need to add the forum link in the email, so I can know the correct problem.
RE: Rapid Incoming calls not connecting - dig1234 - 03-31-2016 10:45 PM
I just resent the files as a link to karl & support@yealink.com please let me know if you get them and what you find.
(03-18-2016 04:22 PM)Yealink_Karl Wrote: I don't receive your email. Would you please send the email to me(karl@yealink.com) again.
Note that you need to add the forum link in the email, so I can know the correct problem.
RE: Rapid Incoming calls not connecting - Karl_Yealink - 04-02-2016 01:15 AM
Hi Daniel，
I had received your email, and thank you for your files.
I will sumbit this problem to our R&D to do an analyze.
Any update, I will let you know.
RE: Rapid Incoming calls not connecting - Karl_Yealink - 04-08-2016 02:38 PM
(04-02-2016 01:15 AM)Yealink_Karl Wrote: Hi Daniel，
I had received your email, and thank you for your files.
I will sumbit this problem to our R&D to do an analyze.
Any update, I will let you know.
Can you help us to get the PCAP file again via the Wireshark.
You can know how to do from the FAQ: http://support.yealink.com/faq/faqInfo?id=311
If possible, please tell me the time of first call and second call.
It can help us to do an analyze.
RE: Rapid Incoming calls not connecting - dig1234 - 04-13-2016 11:58 PM
Can you please clarify what you want me to do? I should reproduce the scenario again and capture with wireshark instead of directly on the phone? Or do you want me to do something with the files I already sent you. Sorry not understanding...
Regarding the times of the calls. The 3cx log I included will tell you times? Let me know if that helps. Thanks
Sorry I didn't see this post sooner, the email notifications on this forum appear to be broken...
RE: Rapid Incoming calls not connecting - Karl_Yealink - 04-19-2016 03:20 PM
(04-13-2016 11:58 PM)dig1234 Wrote: Can you please clarify what you want me to do? I should reproduce the scenario again and capture with wireshark instead of directly on the phone? Or do you want me to do something with the files I already sent you. Sorry not understanding...Sorry that I don't receive the infom email, so I don't see this respond immediately. And I need to tell you more detail info. So you can understand what I want.
Regarding the times of the calls. The 3cx log I included will tell you times? Let me know if that helps. Thanks
Sorry I didn't see this post sooner, the email notifications on this forum appear to be broken...
We check the files. The PCAP files from phone side have limited memory, normallly it's about 200 kb. And you problem about the second call, so the pcap can't capture the message of the second call. So I ask you help us to get the PCAP file via the wiresharl, it don't have the limited memory.
Please help us to get the pcap via wireshark and syslog via phone side.
And please record the time of first call and second call, it will help us to check the file. Just like the 2016.4.6 21:13:50 of first call, 2016.4.6 23:13:50 of second call.
Thank you in advance.
RE: Rapid Incoming calls not connecting - dig1234 - 05-03-2016 10:28 PM
I have sent via email a link to download the new capture. Calls 2 and 4 display the problem. Let me know if any issues with the capture.
(04-19-2016 03:20 PM)Yealink_Karl Wrote:(04-13-2016 11:58 PM)dig1234 Wrote: Can you please clarify what you want me to do? I should reproduce the scenario again and capture with wireshark instead of directly on the phone? Or do you want me to do something with the files I already sent you. Sorry not understanding...Sorry that I don't receive the infom email, so I don't see this respond immediately. And I need to tell you more detail info. So you can understand what I want.
Regarding the times of the calls. The 3cx log I included will tell you times? Let me know if that helps. Thanks
Sorry I didn't see this post sooner, the email notifications on this forum appear to be broken...
We check the files. The PCAP files from phone side have limited memory, normallly it's about 200 kb. And you problem about the second call, so the pcap can't capture the message of the second call. So I ask you help us to get the PCAP file via the wiresharl, it don't have the limited memory.
Please help us to get the pcap via wireshark and syslog via phone side.
And please record the time of first call and second call, it will help us to check the file. Just like the 2016.4.6 21:13:50 of first call, 2016.4.6 23:13:50 of second call.
Thank you in advance.