+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: T46g & T48G RADIUS 802.1x and SHA256 (/showthread.php?tid=13199)
RE: T46g & T48G RADIUS 802.1x and SHA256 - KMTire - 07-12-2017 06:00 PM
Has there been any resolve to this? We are having what appears to be the same issue (except with Yealink T27G phones). I have tried FW versions 69.81.0.110 and, I believe, 69.81.0.25. Both of these version result in a response of error 23 from the radius server. This exact same configuration works fine with T28P w/ FW 2.73.0.40. There are not very many FW's available for the T27G phone and I am guessing all of the releases from 69.81.x.x will have this problem.
Any updates with this is welcomed.
Thanks,
Joe
RE: T46g & T48G RADIUS 802.1x and SHA256 - KMTire - 07-12-2017 06:01 PM
Has there been any resolve to this?
We are having what appears to be the same issue (except with Yealink T27G phones). I have tried FW versions 69.81.0.110 and, I believe, 69.81.0.25. Both of these version result in a response of error 23 from the radius server. This exact same configuration works fine with T28P w/ FW 2.73.0.40. There are not very many FW's available for the T27G phone and I am guessing all of the releases from 69.81.x.x will have this problem.
Any updates with this is welcomed.
Regards,
Joe
RE: T46g & T48G RADIUS 802.1x and SHA256 - MiKeDaDoC - 08-13-2017 07:54 PM
Hi Folks,
any news to this incident wit xx.81.xx.xx firmware not supporting EAP-PEAP/MSCHAPv2 with Microsoft NPS anymore? (SCHANNEL code 46)
We got a x-hunderd T46G phones in the field and need to be able to switch to v81 Firmware for the correct use of 3CX 15.5
Is there a chance anyone could provide me the T46-28.81.0.78 at least, to check if it will work in our environment as mentioned by BigMac?
Thanks a lot.