Yealink Forums
Autoprovision and DHCP Option 43 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Autoprovision and DHCP Option 43 (/showthread.php?tid=1315)



Autoprovision and DHCP Option 43 - mrI - 02-25-2014 12:44 PM

hi.
I want to configure autoprovision using DHCP Option 43. Windows Server 2003 as a DHCP server. Tell me please, how to configure DHCP server option 43. To when the phone connected on the local network, received autoprovision.


RE: Autoprovision and DHCP Option 43 - Yealink Support - 02-25-2014 05:32 PM

Hi mrI,

You can refer to auto provisioning guide for DHCP Option.
Yealink_SIP-T4X_IP_Phones_Auto_Provisioning_Guide_V72


RE: Autoprovision and DHCP Option 43 - mrI - 02-25-2014 06:51 PM

Very good instructions but on how to configure a DHCP server for Windows using DHCP Turbo. I'm trying to configure DHCP server based –úS Windows server platform.
Found a similar setting for Cisco : http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43.html
How to configure Yealink Sip-t2x series ?


RE: Autoprovision and DHCP Option 43 - Yealink Support - 02-27-2014 10:19 AM

Hi mrI,

You can configure DHCP server baed MS Windows server platform follow by Cisco link.
You can configure T2x-v72 phones as t46G auto provisioning guide.
Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide_V72_1.pdf