Yealink Forums
Yealink T19 E2 not support CTI mode - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Yealink T19 E2 not support CTI mode (/showthread.php?tid=13029)



Yealink T19 E2 not support CTI mode - suwat - 03-01-2016 04:27 PM

Yealink T19 E2 not support CTI mode when specifiy IP Adddress class 172.2.138.xxx/24. what IP Address Subnet for Yealink support?


RE: Yealink T19 E2 not support CTI mode - Karl_Yealink - 03-03-2016 01:56 PM

Would you please tell me the detail info or example?
Normally, the phone can support all IP address, it's depend on network environment.


RE: Yealink T19 E2 not support CTI mode - suwat - 03-04-2016 12:11 PM

Thank, Yealink support for your response.

We have order Yealink T19 E2 and Implement for IP phone but we have problem
I have install 3CX system version 14.0 , 3CX soft phone version 14 and Yealink T19 E2 also run as CTI mode.
I have a problem it can not press "Answer" on 3CX soft phone but can be "Decline". The ip address setting 172.2.138.xx/24 on Yealink T19 E2.
If ip address setting 192.168.xx.xx/24 on Yealink T19 E2 it dose work. I nessesary use ip address 172.2.138.xx/24.
What are you have suggests?

What IP Addess subnet for Yealink support ?
My System Environment for Test.
3CX server >>IP Address 172.2.138.xx/24
3CX softfphone >> IP Address 172.2.138.xx/24
Yealink T19 E2 >>>>IP Address 172.2.138.xxx/24

Thank You.


RE: Yealink T19 E2 not support CTI mode - complex1 - 03-04-2016 07:04 PM

Hi,

Maybe the selected Local Subnet is the cause of your issue?
172.2.138.xx/24 is not a Local Subnet for a Private Network
192.168.xx.xx/24 is a valid Subnet for a Private Network

In 3CX:
Default Local Subnets reserved for Private Networks by the IETF and IANA RFC1918 are:
10.0.0.0/8, 169.254.0.0/16, 172.16.0.0/12 and 192.168.0.0/16


RE: Yealink T19 E2 not support CTI mode - suwat - 03-10-2016 10:53 AM

Hi, Complex1
Thank You very much.