Yealink Forums
Problems with telephone T28-P - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: Problems with telephone T28-P (/showthread.php?tid=13021)

Problems with telephone T28-P - vuck - 03-01-2016 07:09 AM

I have it set to 6 SIP lines on the phone YEAHLINK T28P. From the PBX ip randomly telephone calls and for each SIP line button lights up when an incoming call is sent. When there is lot of calls, the 6 buttons each SIP line are turned on simultaneously and the operator captures the call by pressing the appropriate button.
Now my problem: When entering 6 simultaneous calls, only a maximum of 3 buttons light and not displayed the other 3 calls on the phone or the corresponding buttons light to these SIP lines, but before lit up the 6 buttons simultaneously.
I reviewed my PBX IP, and there have been no changes, I think the phone updated its firmware and me is causing this problem. They have heard a similar case ?. I can make a downgrade firmware on the phone? My current version on the phone is:
Firmware version
hardware version

RE: Problems with telephone T28-P - Karl_Yealink - 03-03-2016 10:40 AM

Here is the latest firmware:

Please upgrade then test again.