uaCSTA - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: uaCSTA (/showthread.php?tid=12958) |
uaCSTA - dyna - 02-25-2016 08:53 PM Hi Is there an Imlementation of uaCSTA in the newest Firmware Version of the Phones T42G and T46G. Or how can I do a call from a Application with TAPI compatibility on a Terminal-Server? Do you now a good Software. Thanks for you comment. RE: uaCSTA - James_Yealink - 02-26-2016 12:48 AM Hello, uaCSTA is not supported in common firmware now. We can support CTI/TAPI to control phone. Generally such a software is provided by service provider. There are two software recommended by users before, which you may have a try. http://xtelsio.com/ https://sourceforge.net/projects/siptapi/ Regards, James RE: uaCSTA - dyna - 03-01-2016 04:57 PM hi, xtelsio doesn't give me a tapi on a terminalserver for other applications and siptapi only do a call, i don't can transfer a call or someone else. I have read that CSTA were implemented in V81 (http://forum.yealink.com/forum/archive/index.php?thread-2430-2.html) , is there a tentative release date? Regards, Thomas RE: uaCSTA - bsanders - 03-04-2016 10:53 PM curious about this as well. Yealink please advise. RE: uaCSTA - sks72du - 11-18-2016 06:45 PM Hello, the firmware for the t4x series is available. To test the uacsta feature , we haved enabled the csta control. Now we wanted to test this feature with "Estos UACSTA for SIP-Phones" for CTI functions. But we can not establish a connection from a T48G to the uacsta server. Is this function intended? Need to make more settings on the phone? Regards, Dirk . |