Yealink Forums
[T48G][BLF] Blf on T48G strange issues - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: [T48G][BLF] Blf on T48G strange issues (/showthread.php?tid=12849)



[T48G][BLF] Blf on T48G strange issues - Samael28 - 02-20-2016 08:37 PM

Hi!
I'm working with T48G and Freeswitch. Main issue I get with BLF. It's working great, but for a limited time. After rebooting nearly for 1 hour all is ok. But when some times passed - BLF extensions can turns grey for a some time, than - turn green back and than - just can't update when someone is talking. Also there is a problem with a Day/Night switch (Normally - you subscribe to extension, and receive ONLY changes to this even, simple SUBSCRIBE gives you Not Registered, but than you receive NOTIFY on this).
Is there any parameter like SUBSCRIBE timeout to set it to "Not update, just Subscribe on reboot or once a day" or so? Can't find this one in provision or web interface.


RE: [T48G][BLF] Blf on T48G strange issues - James_Yealink - 02-26-2016 01:02 AM

Hello,

May I know what's the fimeare you are using?
Is it latest firmware 35.80.0.95? If not, please have a try of latest firmware.

http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2016-2-3%2F6%2Fd22cf743-067c-4e0f-b2b1-f3afe89e6d6e%2FT48-35.80.0.95.zip

Regards,
James


RE: [T48G][BLF] Blf on T48G strange issues - Samael28 - 02-26-2016 02:12 AM

Yep, I'm using it.


RE: [T48G][BLF] Blf on T48G strange issues - James_Yealink - 02-26-2016 05:52 AM

Can you please go to Setting-> Configuration, start pcap feature and set system log to level 6. Then reboot the phone.

After the issue occurs, please export pcap trace, system log and configuration file to us.

Thanks
James


RE: [T48G][BLF] Blf on T48G strange issues - Samael28 - 03-29-2016 02:36 AM

Worked a bit on it, found another issue, means may be not an issue, but.
As I've found, Yealink with BLF (Presence) works via Event:dialog. Is there any way to change it to Event:presence, means SIP SIMPLE?


RE: [T48G][BLF] Blf on T48G strange issues - dig1234 - 03-30-2016 11:39 PM

I have the exact same problem on T41P with 3CX. BLF works after bootup then stops working some time later.