+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Outbound Proxy Redundancy (/showthread.php?tid=12793)
Outbound Proxy Redundancy - Novum Networks - 02-17-2016 09:43 AM
We are using version 73 and 80 on our Broadsoft platform.
The option of a primary and back outbound proxy is limiting if there is more than two SBC, where redundancy and laid balancing can be achieved via dns.
Is there a way to have the outbound proxy utilise a single host address for the above. Especially with redundancy.
RE: Outbound Proxy Redundancy - James_Yealink - 02-26-2016 05:47 AM
Hello,
In such a situation, you can only use DNS to achieve it.
Phone only allow two host address.
Regards,
James
RE: Outbound Proxy Redundancy - Novum Networks - 02-28-2016 10:14 AM
Hello James
Are you referring the DNS via SRV.
As the redundancy documentation does not cover outbound proxy.
Regards