+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: OpenVPN - Multiple Phones Loose VPN, never reconnect (/showthread.php?tid=1270)
OpenVPN - Multiple Phones Loose VPN, never reconnect - cmariotti - 02-20-2014 05:53 AM
We have a few clients with their Yealink phones behind their own firewalls... these phones each make an OpenVPN connection to our pfSense Firewalls at our datacenter which hosts their phone servers.
Every so often, their phone(s) loose their OpenVPN connections... Sometimes it is just one phone... sometimes it is both phones... they no longer have OpenVPN connections and are never seen again until the phone is powered off/on. Once powered on, no problems connecting / working.
What can I do so that the Yealink phones reestablish a connection, no matter how long their internet might go down for (no clue if this is the actual problem, is there a way to pull up the logs specifically for lost connections)? Any suggestions on how to keep things running smoothly?
Here is the .cfg file:
dev tun
persist-tun
persist-key
cipher AES-128-CBC
auth SHA1
tls-client
client
resolv-retry infinite
remote 172.172.172.172 1197 udp
ca /config/openvpn/keys/ca.crt
cert /config/openvpn/keys/client1.crt
key /config/openvpn/keys/client1.key
tls-auth /config/openvpn/keys/ta.key 1
ns-cert-type server
RE: OpenVPN - Multiple Phones Loose VPN, never reconnect - Yealink Support - 02-20-2014 12:57 PM
Hi cmariotti,
Someone has solved this problem and please refer to below forum.
http://forum.yealink.com/forum/showthread.php?tid=1229
RE: OpenVPN - Multiple Phones Loose VPN, never reconnect - cmariotti - 03-19-2014 10:40 AM
(02-20-2014 12:57 PM)Yealink Support Wrote: Hi cmariotti,
Someone has solved this problem and please refer to below forum.
http://forum.yealink.com/forum/showthread.php?tid=1229
If I add the following to the vpn.cnf file (as the thread suggests):
proto udp
keepalive 20 30
auth-nocache
script-security 2
It does not connect. If I remove the "keepalive 20 30", re-upload the .tar file, it connects.
The thread you reference has little explanation as to why they are using these parameters, but it specifically states that the keepalive is the solution, but that seems to be actually stopping the .tar from working.
Any advice? Will this be solved in a future Firmware update? Seems more like the fix should be there.
RE: OpenVPN - Multiple Phones Loose VPN, never reconnect - Yealink Support - 03-19-2014 02:53 PM
You should add this syntax in server.ovpn.