Yealink Forums
firmware update via config file - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: firmware update via config file (/showthread.php?tid=1251)



firmware update via config file - jdackert - 02-18-2014 09:11 AM

I'm unable to get a T2x to upgrade firmware via the config file -
firmware.url = tftp://xxx.xxx.xxx.xxx/9.71.193.6.rom
Same with HTTP.

I've tried T20, T26 and T28

The tftp server logs show the phone pulling the file blocks successfully, but it never upgrades successfully.

It pulls the same file fine from a PC when entered in the GUI.

Does this work for anyone? Ideas?


RE: firmware update via config file - Yealink Support - 02-18-2014 01:44 PM

Hi jdackert,

Can you tell me the current version of your phones?
Do you mean that you can upgarde them via webpage?
Please don't forget to add #!version:1.0.0.1 to your syntax.
---------------------------------------------------------
#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
firmware.url = tftp://xxx.xxx.xxx.xxx/9.71.193.6.rom
---------------------------------------------------------


RE: firmware update via config file - jdackert - 02-19-2014 02:23 AM

#!version:1.0.0.1 is the first line of the config file.

I recently tried from 2.72.0.25, 9.71.0.140 and 9.72.0.1

They do upgrade from webpage. I'd like to be able to upgrade phones at customer sites where I don't have GUI access to NAT'ed phones.


RE: firmware update via config file - Yealink Support - 02-19-2014 01:51 PM

Hi jdackert´╝î

Please creat a teamviwer account that i can remote connect to your computer and give an private message to me a probable time that i can help you in site.


RE: firmware update via config file - jdackert - 02-21-2014 03:24 AM

I found the problem - My tftp server was timing out the connection.
It works on a different tftp server


RE: firmware update via config file - Yealink Support - 02-24-2014 03:37 PM

Thanks to your feedback.


RE: firmware update via config file - jdackert - 02-25-2014 09:10 AM

The failure occurs because neither side resends the last Data (server) or ACK (Yealink) as suggested in the tftp RFC.