Hold Causes Transfer - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Hold Causes Transfer (/showthread.php?tid=12428) |
Hold Causes Transfer - fatcatpro - 02-09-2016 07:47 AM Hello, I don't know if I have something configured wrong or if this is a bug. On the latest firmware for T46 something .80.0.70? Transfer via BLF is set to blind transfer. Receive call Press hold Press BLF to call someone on line 2 Line one is immediately transferred to the BLF person. This is the behavior that I expect and want when I use the transfer key, but using the hold key causes the same functionality. Thanks, Addison RE: Hold Causes Transfer - Karl_Yealink - 02-18-2016 03:28 PM Before press the BLF, please press the line 2 key firstly. Receive call Press the hold Press the line 2 key Press the BLF, it will be take a new call from line 2. |