Yealink Forums
Intercom Barge - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Intercom Barge (/showthread.php?tid=124)

Pages: 1 2


Intercom Barge - Voore - 12-06-2012 04:49 AM

I have noticed on the .61 firmware the Intercom Barge doesn't work, even I have set Intercom Barge = Disabled it will still barge in i'm middle of a call

I found this and this have fixed my issue http://www.888voip.com/forum/yealink/1027-intercom-barge-broken-in-new-firmware.html


RE: Intercom Barge - Flora_Yealink - 12-08-2012 12:02 PM

(12-06-2012 04:49 AM)Niki Wrote:  I have noticed on the .61 firmware the Intercom Barge doesn't work, even I have set Intercom Barge = Disabled it will still barge in i'm middle of a call

I found this and this have fixed my issue http://www.888voip.com/forum/yealink/1027-intercom-barge-broken-in-new-firmware.html

hi Nick,
Yes, the V70 version has fixed this issue, you can download the firmware from Yealink web site next week.
Also you could fix the problem by changing AASecIntercom = 1 to AASecIntercom = 0 via auto-provisioning.
[ PhoneSetting ]
path = /yealink/config/Setting/Setting.cfg
AASecIntercom = 0

Best Regards!


RE: Intercom Barge - Voore - 10-18-2013 01:46 AM

I tested on 2.70.150 and its not fixed....


RE: Intercom Barge - stefan@nunetworx.com - 10-23-2013 10:35 PM

(10-18-2013 01:46 AM)Niki Wrote:  I tested on 2.70.150 and its not fixed....
Hey Niki,
I was just troubleshooting and scratching my head today as to why our multicast pages kept interrupting people on calls.

It took me a while to find there's a second group of options that controls the multicast barge.
On the T28 it's under Contacts --> Multicast Paging.
The options are "Paging Barge" and "Paging Priority Active".
Setting both to disabled fixed my issue.

In a provisioning template it would be:
multicast.receive_priority.enable = 0
multicast.receive_priority.priority = 0

Don't know if you had the same problem but hopefully it'll help someone.


RE: Intercom Barge - Voore - 10-23-2013 10:43 PM

(10-23-2013 10:35 PM)stefan@nunetworx.com Wrote:  
(10-18-2013 01:46 AM)Niki Wrote:  I tested on 2.70.150 and its not fixed....
Hey Niki,
I was just troubleshooting and scratching my head today as to why our multicast pages kept interrupting people on calls.

It took me a while to find there's a second group of options that controls the multicast barge.
On the T28 it's under Contacts --> Multicast Paging.
The options are "Paging Barge" and "Paging Priority Active".
Setting both to disabled fixed my issue.

In a provisioning template it would be:
multicast.receive_priority.enable = 0
multicast.receive_priority.priority = 0

Don't know if you had the same problem but hopefully it'll help someone.
Thanks stefan, but this didn't help my issue as i'm talking from regular intercom not from multicast, hope it will help someone else...


RE: Intercom Barge - mayya - 10-28-2013 07:31 PM

Post: #1LDAP picture attribute
Hello,

Is it possible to get a contact picture from the openldap directory on the screen of my T46G when the contact is calling me?


RE: Intercom Barge - Yealink Support - 10-29-2013 10:31 AM

Hi Niki,

I test in our T28 with 2.71.0.140 and this feature can work well.
1. I enable " Accept Intercom", enable " Intercom Barge" in webpage.
A can intercom B even if B is in a talk.

2. I enable " Accept Intercom", disable " Intercom Barge" in webpage.
A intercom B when B in a talk, LCD of B will prompt a coming call symbol.

Can you try again?
http://www.yealink.com/Upload/T2X/T2X-V71/2.71.0.140.zip


RE: Intercom Barge - Voore - 10-29-2013 10:40 PM

I just tried again with this firmware and it still not working....

just to add, we're using FreeSwich as our server, if this helps...


RE: Intercom Barge - Yealink Support - 10-31-2013 03:37 PM

Hi Niki,

We have a freeswitch server and I will test in yealink first.
If i can't reprduce your issue in our side, please supply us Syslog level 6, config.bin and pcap.

Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)

These three files are very important for us, hope you can kindly understand.


RE: Intercom Barge - braymond - 11-12-2013 09:56 AM

Hi Yealink support,

This barge-in issue is becoming more and more a problem to the community. I am sure you understand the problems integrators are facing when in front of customers.

I had to revert using the multicast to avoid barging on calls but that is not my target goal so I also need the get this fixed if I want to continue using Yealink phones to my deployments.

I have reproduced the issue and here is the zip file with config.bin, syslog and pcap. It's very easy to reproduce with Freeswitch.

In hope you can provide us with a quick fix.

Thanks,
Benoit