How unregister handset - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: How unregister handset (/showthread.php?tid=12365) |
How unregister handset - Tomaszf - 02-02-2016 04:40 PM I need help. What do I need to remove the handset from the base (W52P) (i don't have this handset)? Thanks for help. RE: How unregister handset - Yealink_Michael - 02-02-2016 08:41 PM hi please try to do a hard rest for W52, the steps are below: 1. connect the network cable to the base 2. long press the paging key on the base and not stop until step3 is finished 3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process, please keep pressing the paging key ! 4. after the three lights all light up, release the paging key and reconnect the power supply TKS & BR Michael RE: How unregister handset - KNERD - 10-22-2016 05:19 AM (02-02-2016 08:41 PM)Yealink_Michael Wrote: hi Did you miss a step? How can you "reconnect" the power supply which has been already connected? RE: How unregister handset - Lucia_Yealink - 10-24-2016 08:54 AM (10-22-2016 05:19 AM)KNERD Wrote:(02-02-2016 08:41 PM)Yealink_Michael Wrote: hi Reconnect the power supply means disconnect the power supply and then connect it again. RE: How unregister handset - KNERD - 11-01-2016 07:49 PM (10-24-2016 08:54 AM)Yealink_Lucia Wrote:(10-22-2016 05:19 AM)KNERD Wrote:(02-02-2016 08:41 PM)Yealink_Michael Wrote: hi Thank you kindly. |