T22P contrast settings - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: T22P contrast settings (/showthread.php?tid=1213) |
T22P contrast settings - Henry - 01-24-2014 06:02 PM After a reboot the contrast on my T22P is set to 1 which leads to a very light display, but I can't seem to find a way to set this to a higher value. Thanks in advance RE: T22P contrast settings - Yealink Support - 01-24-2014 09:23 PM Hi Henry, Can you tell me the version of your T22P? Can you reboot or reset to facotry and test again? RE: T22P contrast settings - Henry - 01-24-2014 10:13 PM Hello, Firmware Version is 7.70.188.13, Hardware Version 5.0.0.61. Resetting the phone to factory caused it to hang on 'Sending Provisioning Requests' RE: T22P contrast settings - Yealink Support - 01-25-2014 09:32 AM (01-24-2014 10:13 PM)Henry Wrote: Hello, Hi Henry, Sorry. Do you mean your phone is stuck in 'Sending Provisioning Requests' interface? Can you contact our local distributor Lydis for help? RE: T22P contrast settings - Henry - 01-25-2014 11:41 PM The phone is functioning again (held the ok-button for 10 seconds) and the display is readable again. But still strange there is no way to adjust the contrast settings. RE: T22P contrast settings - Yealink Support - 01-26-2014 01:50 PM Hi Henry, Sorry. I can't see any contrast settings in the T22P with 7.70.188.13. |