+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: losing softkey programming (/showthread.php?tid=12113)
losing softkey programming - cbroessel - 01-16-2016 08:38 PM
I have the t46g and t21 phones, i provision from 3cx, then program the line buttons to be speed dials. then i lose programming on the keys i programmed. l have 2 exp40 modules on a t46 and the first one lost all its programming as well as all but the first two speed dial buttons i programmed. i searched the forums and couldn't find any help on this
also i have 44 rooms to program with speed dials on the phones. 3cx cannot program the softkey buttons, is there anyway to automatically do this so i don't have to manually imput the information? thanks
chris
RE: losing softkey programming - Karl_Yealink - 01-18-2016 11:09 PM
You can try to auto provision the phone.
You can get more info about this from the guide(page 751): http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-7-13%2F3%2Feb7b2fbc-3877-42e8-be19-c605e552aea1%2FYealink_SIP-T2_Series_T19%28P%29+E2_T4_Series_IP_Phones_Administrator_Guide_V80_60.pdf
Here is the guide about auto provisoin: http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-7-13%2F3%2Fd9edb38a-80c2-4649-ae20-8001126b8219%2FYealink_SIP-T2+Series_T19%28P%29+E2_T4+Series_IP_Phones_Auto_Provisioning_Guide_V80_60.pdf