+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T48G Firmware 35.80.0.60 Broken (/showthread.php?tid=12090)
T48G Firmware 35.80.0.60 Broken - c99hris - 01-15-2016 08:03 AM
I updated to the latest firmware today and discovered in a few minutes the following are now broken. Park keys do not show caller is parked, the DSS key should turn red, stays green. User button should turn red when the user is on the phone stays green.
I went back to 35.73.0.50
Its hard to believe that this new 35.80 was tested and then released.
RE: T48G Firmware 35.80.0.60 Broken - Karl_Yealink - 01-15-2016 10:46 AM
Hi,
Do you mean the BLF function?
And will it work normally in 35.73.0.50?
RE: T48G Firmware 35.80.0.60 Broken - switlox - 01-15-2016 06:06 PM
check the "BLF LED mode" in the Features --> general information tab. It should be set to 0 (sometimes the new firmware sets this to 3)
RE: T48G Firmware 35.80.0.60 Broken - c99hris - 01-16-2016 11:35 PM
(01-15-2016 10:46 AM)Yealink_Karl Wrote: Hi,
Do you mean the BLF function?
And will it work normally in 35.73.0.50?
Yes, normal in 35.73.0.50
RE: T48G Firmware 35.80.0.60 Broken - c99hris - 01-17-2016 12:55 AM
The BLF key is configured: Line Key7, BLF, Value 107, Label xxx, Line Line 1
The BLF flashes showing users either talking, ringing, etc with 35.73.0.50 the BLF keys work, with the latest version 35.80.0.60 the BLF keys do not work and yes the BLF LED mode is set to 0
RE: T48G Firmware 35.80.0.60 Broken - Karl_Yealink - 01-19-2016 04:20 AM
Please help us to get the pcap and config.bin and syslog files.
You can get more info from the link: http://support.yealink.com/faq/faqInfo?id=311
If possible, please send the files to my email, so the file won't be publiced.
It's better you can add the link of this post in the email, so I can find it more quickly.