+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Time Offset with Broadworks on t46g (/showthread.php?tid=12079)
Time Offset with Broadworks on t46g - jeff.wilde@parkregion.com - 01-14-2016 06:31 AM
I can't seem to get the time offset to take no matter what i do with this phone. It appears that it is always going through GMT as it is 6 hours off. I can not find anything on line that is useful. I have tried several things, but I believe this is one of them that i read:
local_time.time_zone = -6
and putting us/central or whatever in there.
ok they must be needed to factory defaulted. worked.
RE: Time Offset with Broadworks on t46g - Karl_Yealink - 01-14-2016 01:43 PM
Suggest that you can disable the DHCP time then test again.
If possible, please take a picture of the configuration web interface(settings->Time&Data)