t48G BLF not working - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: t48G BLF not working (/showthread.php?tid=12046) |
t48G BLF not working - baobcs - 01-12-2016 12:11 AM 4 phones Yealink t48g Firmware Version 35.80.0.70 + FreePBX 13.0.49 , Asterisk Version: 13.5.0 + BLF I've set up 4 t48g phones on my local network and remote network (2 Server : local server for testing, remote server is live ) . Everything seem to work fine . I can dial out, receive call, transfer .. call just fine . The only problem I have right now is BLF does not work at all . All 4 phones Phone 1: Extension 500, BLF:501,502,503 Phone 2: Extension 501, BLF:501,502,503 phone 3: Extension 502, BLF:501,502,503 phone 4: Extension 503, BLF:501,502,503 all the BLF keys registed and stay green when I press on these BLF key , phone will dial extention but none of the phone BLF key change the status . They all stay green. After spending 1 full day on google and on this forum . Here is what I did I went into each phone webpage and make sure: Account -> Advanced -> SIP Server Type = Default On Freepbx: Settings->Advanced Settings->Display Readonly Settings + Override Readonly Settings = YES Dynamically Generate Hints = YES Reboot phones and servers . Everything seem to work find but BLF still does not work . Please help [attachment=1902][attachment=1901][attachment=1903][attachment=1905] RE: t48G BLF not working - baobcs - 01-12-2016 10:21 AM after a full day battling with these 3 t48g phones . I got 1 of them to work phone 1: ext 500 phone 2: ext 501 phone 3: ext 502 If I set up all 3phones PJSIP extention then they are registered and work fine but BLF does NOT work If I set up all 3phones to CHAN_SIP extention then only phone 1 registered and BLF works but phone 2,3 do NOT registered So PJSIP is causing problem with my T48G but what happen to phone 2,3 ? Why do they not registered ? I checked CHAN_SIP ext 501,502 with phone 1 and it work no problem at all but if I use phone 2,3 they do NOT registered Can someone please help This is my 3th day battling . Im going crazy here It is posible that my freepbx server firewall these 2 phones and prevent them from registering? If so then why if I config with PJSIP then these 2 phone registered and worked fine The problem only occur with my live server . On the local test server once I test with CHAN_SIP all the phone work and BLF work too . NOte : 1. T48G have the latest firmware 35.80.0.70 2. I've reset to factory setting many time but these 2 phones but that do not help RE: t48G BLF not working - Karl_Yealink - 01-12-2016 04:29 PM Hi, Here are something want to confirm: 1. Would you please tell me more info abou the CHAN_SIP and PJSIP , I don't know clearly about these. 2. Would you please help us to get the PCAP and syslog and config.bin files, we can check something from them. You can get more info from the link: http://forum.yealink.com/forum/showthread.php?tid=1319 It's better you can get the files from the three phones. 3. If possible, would you please give me the account info, so I can test here? You can email to me(karl@yealink.com), if you don't want the files to be public. RE: t48G BLF not working - olegsenin - 01-18-2016 01:59 PM After updating to 13.7 asterisk (freePBX) at me everything earned. |