+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: Time Synchronization not working (/showthread.php?tid=11921)
Time Synchronization not working - mloiterman - 12-31-2015 03:08 AM
I keep enabling Time Synchronization, and it will work after initially confirming the changes, but it keeps getting disabled after 24 hours or reboot. This is on firmware 25.73.0.40.
RE: Time Synchronization not working - Yealink_Michael - 12-31-2015 06:05 AM
hi
for this issue , please make sure that the NTP server is working fine , then you can adjust the Synchronization Period parameter to 60 to see if it solved your issue or not .
webpage path : Phone -> Preference -> Synchronization Period value range is 60 to 86400
TKS & BR
Michael
RE: Time Synchronization not working - mloiterman - 12-31-2015 07:51 AM
Time Synchronization works. That's not the problem.
The problem is that it getting disabled somehow.
RE: Time Synchronization not working - complex1 - 12-31-2015 04:21 PM
Hi,
If you are provisioning the phone then make sure this parameter is setup correctly in the template.
************************************************************************
# !version:1.0.0.1
# Enable or disable the IP phone to obtain time from manual settings; The default value is 0.
# 0-Disabled (obtain time from NTP server)
# 1-Enabled (obtain time from manual settings)
local_time.manual_time_enable = 1
************************************************************************
RE: Time Synchronization not working - mumtran - 10-14-2016 05:37 PM
HI
" webpage path : Phone -> Preference -> Synchronization Period value range is 60 to 86400".
Thanks