+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: dhcp vlan option 132 - works without settings visible in UI (/showthread.php?tid=11826)
dhcp vlan option 132 - works without settings visible in UI - dywilson - 12-14-2015 06:42 PM
Hi,
I have just managed to get the DHCP vlan option set and working for T19P E2, T42G & T46G phones.
I have noticed that whilst I can make it work, when I inspect either the phone UI or the web UI, the vlan id is not shown and in fact it reports that the vlan for the wan port is disabled. However the phone does connect on the vlan and works as expected.
Is this a bug?
As I said it seems to work just fine - but fails to report the configuration correctly in the UI.
Dave
RE: dhcp vlan option 132 - works without settings visible in UI - Yealink_Michael - 12-15-2015 06:57 AM
hi Dave
thanks for you information
it is set by design ,as if it is enabled and filled the VID , then if the phone is moved to other network , then there will be a problem to get a new IP address
TKS & BR
Michael
RE: dhcp vlan option 132 - works without settings visible in UI - salar - 06-22-2017 12:48 PM
(12-14-2015 06:42 PM)dywilson Wrote: Hi,
I have just managed to get the DHCP vlan option set and working for T19P E2, T42G & T46G phones.
I have noticed that whilst I can make it work, when I inspect either the phone UI or the web UI, the vlan id is not shown and in fact it reports that the vlan for the wan port is disabled. However the phone does connect on the vlan and works as expected.
Is this a bug?
As I said it seems to work just fine - but fails to report the configuration correctly in the UI.
Dave
hi
please help me about dhcp option on microsoft windows server or other soloution
my ip-phone is t19p E2
my dhcp server is windows server 2008
i have voice vlan for ip-phones
thanks