T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T46G Firmware 28.80.0.60 disables the intercom auto-answer function (/showthread.php?tid=11647) Pages: 1 2 |
RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Lucia_Yealink - 07-28-2017 06:04 AM (01-20-2016 05:05 AM)dew3flr Wrote:(12-02-2015 08:10 AM)KenDoerksen Wrote: I have tested on 4 different phones now all hardware version 28.2.0.128.0.0.0. When using the intercom between the phones on firmware version 28.80.0.60 the phones just ring. I downgraded the phones to firmware version 28.73.0.50 and they all auto-answer the incoming intercom as expected again. For the intercom, please refer to the picture below to configure it: [attachment=4474] RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Lucia_Yealink - 07-28-2017 06:05 AM (01-21-2016 11:35 PM)Renusa-Bryan Wrote: Not sure about the functioning in this version, but 28.80.0.70 is available. Maybe it got fixed? Please upgrade the firmware to the latest version and tesst again :http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-5-23%2F6%2F1ef42da2-4a66-449e-b7a5-1626b1a56e66%2FT46-28.81.0.110.zip Any problem, please let me know. |