T46 won't provision distinctive ring properly - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T46 won't provision distinctive ring properly (/showthread.php?tid=11609) |
T46 won't provision distinctive ring properly - imfloridaguy - 11-29-2015 07:17 PM Hello, I'm running firmware version 28.80.0.70 on a T46G I am provisioning the following: features.alert_info_tone=1 distinctive_ring_tones.alert_info.1.text=InfoText-1 distinctive_ring_tones.alert_info.1.ringer=Ring2.wav distinctive_ring_tones.alert_info.2.text=InfoText-2 distinctive_ring_tones.alert_info.2.ringer=Ring3.wav The first line (distinctive_ring_tones.alert_info.X.text) provisions correctly. The second line (distinctive_ring_tones.alert_info.X.ringer) does NOT provision correctly. It has to be changed in the GUI manually. Look at the picture and you'll see that it always stays as Ring1.wav. Is this a known bug? I have confirmed that with a T26P running firmware 6.73.0.50 it does work properly. RE: T46 won't provision distinctive ring properly - James_Yealink - 11-30-2015 02:36 PM Hello, The personalized setting protect may be enabled. You can reset local config under Setting-> Upgrade or disable the feature by provision: auto_provision.custom.protect = 0 For more info about the feature, please check autoprovision guide. Regards, RE: T46 won't provision distinctive ring properly - imfloridaguy - 12-01-2015 04:46 AM James, No, we do not use the auto_provision.custom.protect setting. This has burned us before and we stopped using it 6 months ago. However, just to be safe, I checked the config to confirm it is not there. What's next? Have you tested this in-house? I've tried on several phones and can duplicate it. Guy RE: T46 won't provision distinctive ring properly - imfloridaguy - 12-05-2015 07:25 PM James, Can you update me on this? RE: T46 won't provision distinctive ring properly - Yealink_Michael - 05-21-2016 12:53 AM hi. guy it is advised to upgrade to the mewest firmware and then reset to factory to test again! firmware. download link: http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2016-2-3%2F6%2Fbf98c97c-c253-4e67-a503-626522f0a354%2FT46-28.80.0.95.zip i will also. test in my side. just. let me know if any question through. email michael |