+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: EXP40 Provisioned as a Stand Alone Device? (/showthread.php?tid=1158)
EXP40 Provisioned as a Stand Alone Device? - printwest - 01-11-2014 05:36 AM
We have eliminated the need for receptionist now that we have a 3CX PBX, DID's and Yealink phones, but a couple times a day we have vendors and/or customers come in.
Instead of having someone sit up in the front office is it possible to provision an expansion module without a host phone?
We want to put up a sign that says press a button (on the EXP) for assistance. That way we can program buttons such as "Pickup Will Call Order", "Dropoff", "I'm here to see John Doe", etc. Then 3CX would send a recorded message and/or email depending on which button was pressed.
RE: EXP40 Provisioned as a Stand Alone Device? - Yealink Support - 01-11-2014 11:36 AM
Hi printwest，
Sorry. We don't support this feature now. But we take it into the wishlist.
RE: EXP40 Provisioned as a Stand Alone Device? - printwest - 01-16-2014 04:23 AM
We only have T42G's is it possible to use an expansion on that model?
RE: EXP40 Provisioned as a Stand Alone Device? - Yealink Support - 01-16-2014 09:07 AM
(01-16-2014 04:23 AM)printwest Wrote: We only have T42G's is it possible to use an expansion on that model?
Sorry. T42G doesn't support expansion. T46G and T48G can support EXP40.