Yealink Forums
DND should flash red - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: DND should flash red (/showthread.php?tid=1153)

Pages: 1 2

RE: DND should flash red - IP PBX_Support - 03-10-2014 08:57 AM

Got this working.

Yealink SIP-T28P with v71 (RPS firmware)
Asterisk / FPBX 2.11

Set a PFK (button) (one of the ten on the right) as a BLF.
The code to enter is *76

Make sure FPBX has changed from the default FALSE to TRUE under 'Advanced Settings' for "Enable Device States"

Set a BLF on another phone for the above extension

It does not matter if the Yealink SIP-T28P has either phone or custom DND mode (in the phone's GUI)
I suggest you 'remove' the DND button all together (softkey).

When press the BLF, the light will go from GREEN to RED.
The BLF on the other phones will go from GREEN to RED.

I hope this helps.


RE: DND should flash red - Yealink Support - 03-10-2014 01:38 PM

Hi Shawn,

Thanks to your sharing. I think *76 is the code of DND ON/OFF for your server.

RE: DND should flash red - IP PBX_Support - 03-24-2014 02:29 AM

We solved this by turning off (removing) the DND button as a 'softkey' (button 3 or 4).
I then added a BLF key (not the DND key) as one of the 10 PFK buttons on the right of the phone (SIP-T28P).

The settings used were *76 (DND toggle).

Now, we have a GREEN light full time, and others see a RED light for the BLF (when) the user dials or presses the "DND" BLF (*76).
This is working.

RE: DND should flash red - Raffles - 04-17-2014 08:55 PM

Simply subscribe (via hints) to a custom device state and change this when the DND key is pressed.