+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Both T32G's are bricked (/showthread.php?tid=1138)
Both T32G's are bricked - dwoods - 01-01-2014 11:12 PM
We are use the End Point Manager in FreePBX to manage our test phone and recently updated it. As part of that update, it downloaded 32.70.0.130 firmware.
The two test phone successfully downloaded the firmware, and then displayed a screen that says:
Welcome
Initializing... Please Wait
We've been waiting for almost 24 hours. I've tried power cycling one phone with no luck, it just shows the above screen.
These phones seem to be bricked. How can I get them back to an operational state?
RE: Both T32G's are bricked - Yealink Support - 01-02-2014 02:24 PM
Hi dwoods,
Can you tell me the SN and MAC of your T32G?
Do your T32Gs work well before upgrade?
RE: Both T32G's are bricked - dwoods - 01-02-2014 10:19 PM
Yes, both were working fine, much better than the two T46G's that we have been evaluating.
They are:
1107213043400715
0015654B3C20
1107213043400923
0015654B3BE4
RE: Both T32G's are bricked - dwoods - 01-06-2014 09:38 AM
Hello?
I still have two bricked phones. Is there any way that I can get them working again or do I need to return them?
RE: Both T32G's are bricked - Yealink Support - 01-06-2014 09:46 AM
Hi dwoods,
Do you test about recovery mode? Can't they work again?
RE: Both T32G's are bricked - dwoods - 01-09-2014 04:45 AM
I was finally able to find some documentation on using recovery mode (Thanks google), and I was finally able to find the bootroms on your ftp site (again thanks google). The phone have successfully been unbricked (thanks yealink, although actual documentation that recovery mode even exists and how to use it would have been nice).