+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G how to turn off PC port (/showthread.php?tid=1116)
T46G how to turn off PC port - Gary Clarke - 12-20-2013 01:42 AM
I have T28's and T22's that I can shut off the PC port in the GUI, we don't allow computer connections to the voice network, I can not see any settings for this on the new T46G phones. is this possible through a config file and if so how is it done.
thanks,
RE: T46G how to turn off PC port - Yealink Support - 12-20-2013 09:00 AM
Hi Gary Clarke，
You can shut off the PC port through auto provisioning method.
Please use below syntax to shut off the PC port.
-------------------------------------
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
#It enables or disables the PC port. 0-Disabled 1-Enabled, the default value is 1. ##
network.pc_port.enable = 0
-------------------------------------
You can get above syntax in the auto provisioning guide in page 60.
http://www.yealink.com/Upload/T4X/GA/20131106/Yealink_SIP-T4X_IP_Phones_Auto_Provisioning_Guide_V71_180.pdf