Yealink Forums
T22P Display cycles every 10 seconds - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T22P Display cycles every 10 seconds (/showthread.php?tid=11053)



T22P Display cycles every 10 seconds - Tgarius - 10-24-2015 05:56 AM

I have a couple T22P phones, I have flashed the latest firmware 7.73.0.50 (I'm not sure when you would use the 193 version. I am using them with FreePBX and everything looks to be going well but the display annoyingly goes to the Yealink screen every 10 seconds or so then back to the normal display.. any ideas?

Thanks


RE: T22P Display cycles every 10 seconds - Yealink_Michael - 10-24-2015 06:17 AM

hi

please to the web page path : Features -> General Information -> Use Logo

then select OFF

then the Yealink logo will disappear

screen short attached below :
[attachment=1798]

TKS & BR

Michael