Auto Provisioning using HTTP - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: Auto Provisioning using HTTP (/showthread.php?tid=10972) |
Auto Provisioning using HTTP - Zach Taggett - 10-22-2015 04:41 AM I was looking in to the possibility to auto provision Yealink phones(specifically t21/t26 models) using HTTP. Any information would be helpful. I already do this using TFTP server with ease. Problem is, some of these phones are not reachable to our TFTP server. I have heard that there is the possibility of using HTTP and possibly sending a reboot code to these phones as well in the same way. Thanks for your help in advance RE: Auto Provisioning using HTTP - Yealink_Michael - 10-22-2015 06:04 AM hi thanks for your information for the HTTP server , please refer to the guide download from below link : http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-3-12%2F3%2Fa1453834-d387-42f8-9951-cbfcd4209cd9%2FYealink_SIP-T2_Series_T4_Series_IP_Phones_Auto_Provisioning_Guide_V73_40.pdf page 76-78 TKS & BR Michael |