+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Expansion modul LED (/showthread.php?tid=10914)
Expansion modul LED - pio007 - 10-19-2015 03:53 PM
Hi,
Since the update of my T48G to 35.80.0.70 the led indicators of the expansion modul aren't working any more! The BLF works without any problem, but the led is off (both red or green).
I didn't change anything in the settings...
How can i fix this? BLF led modus is zero.
Thank you very much.
Marc
RE: Expansion modul LED - James_Yealink - 10-19-2015 06:07 PM
Hello Marc,
What's your pbx server? Can you have a try of 35.80.0.72 firmware.
http://ftp.yealink.com/?ShareToken=D93D1F301C7E3BB9BCF7D6A645291A1A00D48C41
Regards,
James
RE: Expansion modul LED - pio007 - 10-20-2015 04:40 AM
Hi James,
Thanks for your answer....
I am using Askozia (latest version) as pbx server.
I wil try FW 72 when i'm back at office.
Thank you
regards
Marc
RE: Expansion modul LED - pio007 - 10-24-2015 10:33 PM
Hi James,
Thank you for your help. The new FW worked just perfect. The LED lights are back on!
But this version (72) isn't the actual one from the homepage of yealink, is it?
From where do you have this version and for the future: which version should i take for updates?
Thanks once again.
Regards Marc