LDAP and T26 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +--- Thread: LDAP and T26 (/showthread.php?tid=10816) |
LDAP and T26 - centoasa - 10-16-2015 04:49 AM I've just success configure my T38 with Grandstream UCM6102 pbx and LDAP. So I've used this string configuration: name filter: (CallerIDName=%) number filter: (AccountNumber=%) pbx IP basec=pbx,dc=com attribute name: CallerIDName Email Department FirstName LastName attribute number:AccountNumber MobileNumber HomeNumber Fax show ldap: %AccountNumber %CallerIDName This works wel on t38, but on t26 my ldap directory show always "empty" Why? RE: LDAP and T26 - Yealink_Michael - 10-16-2015 05:00 PM hi for this issue , please upgrade T26 to the newest firmware and test again , make sure the LDAP configuration is correct T26 firmware download link : http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-3-12%2F6%2F85947342-5fc7-46de-aa4d-204fac541843%2F6.73.0.50.zip RE: LDAP and T26 - centoasa - 10-20-2015 01:23 AM On t38 show ldap contact, on t26 I must search contact to show. |