T48G - BLF/LineKey - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48G - BLF/LineKey (/showthread.php?tid=10809) |
T48G - BLF/LineKey - Futureweb - 10-14-2015 02:24 AM Hello, I'm trying to create the Auto-Provisioning Template for our new T48G Phones conntected to 3CX PBX. I'm struggling a bit with the BLF/LineKeys ... The first 2 Keys (left upper side) are always shown as *Line Keys* and I can't assign them as BLF?!? No matter what I configure within Template - they always show the Name configured for this Phone ... Hope someone can help me on this?! (I'm pretty new to BPX, SIP, ...) Thx Andreas Schnederle-Wagner RE: T48G - BLF/LineKey - James_Yealink - 10-14-2015 05:27 AM Hello Andreas, The 2 key can be changed. Please go to phone web interface-> Setting-> Upgrade, do you see "Reset Local Configuration"? If yes, please reset it and provision again. If not, can you show us the template. Regards, James RE: T48G - BLF/LineKey - Futureweb - 10-14-2015 03:41 PM Hi James, I'm using the standard 3CX Template for your Phones. Had to rewrite pretty much to change this behaviour ... within the TPL they static assigned the 2 First Buttons for LineKey and starting with Button 3 for BLFs ... It's working now! Thank you, bye from Austria Andreas |