Endpoint with VC400 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Endpoint with VC400 (/showthread.php?tid=10806) |
Endpoint with VC400 - avayax - 10-13-2015 10:55 PM I am looking into the VC400. When making a video call, what is on the other end of my local VC400, another VC400? Or can it be a simple video capable softclient, or even a VP530. Also, can you elaborate on the differences betwenn VC400 and VC120? Thanks. RE: Endpoint with VC400 - James_Yealink - 10-14-2015 01:04 AM Hello, yes it can be a simple video capable softclient. VP530 is ok too. There is no a built-in MCU in VC120. VC400 has a build-in 4 site MCU and can support 4 site 1080P full-HD video conferencing. Regards, James |