Yealink Forums
Public Hold phased out? - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Public Hold phased out? (/showthread.php?tid=1070)



Public Hold phased out? - JamesK - 12-03-2013 04:24 AM

I noticed in the T38G I have a public hold option. not sure how it works just yet. But i noticed on the T41P there is no public hold function. My guess is it was phased out? or forgotten about? any ever used it?


RE: Public Hold phased out? - Yealink Support - 12-03-2013 04:47 PM

Hi JamesK,

Shared Call Appearance will use public hold option.
T38G doesn't have broadsoft version and other version.
T41P has broadsoft version and other version. Public hold function will be in the broadsoft version of T4X.

Note: Sorry. This option has been moved off now.


RE: Public Hold phased out? - JamesK - 12-03-2013 10:48 PM

(12-03-2013 04:47 PM)Yealink Support Wrote:  Hi JamesK,

Shared Call Appearance will use public hold option.
T38G doesn't have broadsoft version and other version.
T41P has broadsoft version and other version. Public hold function will be in the broadsoft version of T4X.

I am very confused what does broadsoft version have to do with the question? are you saying that the Broadsoft version has that function? If so the post I made about firmwares and which version is right for me, using the Broadsoft version is counter that post.


RE: Public Hold phased out? - Yealink Support - 12-06-2013 04:27 PM

Hi Jamesk,

Sorry. This option has been moved off now.