Programming Message Key - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: Programming Message Key (/showthread.php?tid=1066) |
Programming Message Key - ccwtech - 11-30-2013 12:11 AM I have a T22P. When I press the message key, if I enter the extension # under account number, when I press it after it's programed it calls the extension and I can eventually get to voicemail. Is there a way I can have it call voicemail directly without having to let the phone ring till voicemail picks up? RE: Programming Message Key - strabuzano - 03-27-2014 02:17 AM (11-30-2013 12:11 AM)ccwtech Wrote: I have a T22P. When I press the message key, if I enter the extension # under account number, when I press it after it's programed it calls the extension and I can eventually get to voicemail. Try instead of entering the extension number, entering the feature code for the voicemail. For example on Freepbx *97. RE: Programming Message Key - rlsabin - 03-27-2014 05:23 AM If you go into the advanced settings under account there is a spot to define the voicemail extension. If you fill that field, that is the extension that will be called when you push the message waiting button. Rick RE: Programming Message Key - ccwtech - 03-27-2014 06:29 AM (03-27-2014 02:17 AM)strabuzano Wrote:*97 is the trick. Thanks!(11-30-2013 12:11 AM)ccwtech Wrote: I have a T22P. When I press the message key, if I enter the extension # under account number, when I press it after it's programed it calls the extension and I can eventually get to voicemail. |