Change DND functionailty - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Change DND functionailty (/showthread.php?tid=10364) |
Change DND functionailty - TomT - 10-07-2015 01:00 AM Hi Is it possible to use the DND Code On and DND Code Off to update the DND Status on our PBX, but NOT enable DND on the phone ? Ideally I'd like to be able to use the phones DND button and see the DND status image, but I don't want the phone to do any DND... only the PBX. That way the phone system controls the DND routing not the handset. Thanks RE: Change DND functionailty - CWR - 10-07-2015 06:51 AM I want this too. Often users set DND on the phone, then unset it on the server using the softphone - in this manner, the desk phone is still in DND mode. RE: Change DND functionailty - bsanders - 10-07-2015 09:24 PM This would be great. RE: Change DND functionailty - TomT - 10-08-2015 05:26 PM So how do we do this then ? RE: Change DND functionailty - CWR - 10-08-2015 10:28 PM Perhaps Yealink will create a combobox selection: "on Phone", "on Server", "Both" - for DND button. RE: Change DND functionailty - TomT - 10-14-2015 12:36 AM Do we know if they will do this... or are we all just hoping ? Thanks RE: Change DND functionailty - ndsimpson - 05-10-2016 09:07 AM I posted a thread before seeing this one. I want this too. |