MWI for Multi users - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +--- Thread: MWI for Multi users (/showthread.php?tid=1034) |
MWI for Multi users - tlsallada - 11-19-2013 08:28 AM I have a T42G in a shared office. Can I program three different buttons for message waiting indicators for three different voicemail boxes? I'm using 3CX V12 and have set up 'virtual' users for voicemail. RE: MWI for Multi users - CWR - 11-20-2013 06:06 AM With 3cx it knows which extension you are calling from... so it puts you into that mailbox. For your need simply hit the VM button, then dial # and the system will ask for extension number. Then followed by PIN number. RE: MWI for Multi users - tlsallada - 11-20-2013 01:58 PM The users are spoiled by the old Executone system I'm replacing and would like the multi MWI that it offers. Seems like an advanced system like this could do what a 30 year old PBX does!! RE: MWI for Multi users - CWR - 11-21-2013 02:34 AM If you assigned the BLF to a line then you could use that lien to call VM - but still not the MWI... |