Removed features from firmware v28.71.0.180 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Removed features from firmware v28.71.0.180 (/showthread.php?tid=1026) |
Removed features from firmware v28.71.0.180 - Boolah - 11-14-2013 07:47 PM In a previous firmware (specifically firmware version v28.71.0.155), there was a parameter to enable LDAP queries while dialing and a feature to specify what type of query to perform by default. The two options were: #Configure the input type when the phone is in the dialing state, if the parameter "ldap.dial_lookup" is Enabled; 0-2aB, 1-123 (default), 2-abc, 3-ABC; features.ldap.input_type = 1 ldap.dial_lookup = 1 These two parameters no longer appear to function in the above-referenced firmware version. Moreover, they are no longer documented in the Auto Provisioning guide. Can both parameters be brought back? It was a useful feature to have. RE: Removed features from firmware v28.71.0.180 - Yealink Support - 11-16-2013 11:08 AM Hi Boolah, Thanks for your feedback. I will send your request to our product department to evaluate. RE: Removed features from firmware v28.71.0.180 - Yealink Support - 11-16-2013 11:45 AM Hi Boolah, You can enable LDAP queries while dialing in super_search.xml. You can refer to http://forum.yealink.com:81/forum/showthread.php?tid=858&page=2 for more details. Also you can find the setting in the Directory on the webpage of phone. 1. Download the http://www.yealink.com/Upload/T4X/GA/Aut...ioning.zip which contains "common.cfg" and "super_search.xml" in XML Template Files floder. 2. Edit the super_search.xml, enable "remote_directory_search" as 1 ----------------------------------------------------------------------------------------- <root_super_search> <item id_name="local_directory_search" display_name="Local Contacts" priority="1" enable="1" /> <item id_name="calllog_search" display_name="History" priority="2" enable="1" /> <item id_name="remote_directory_search" display_name="Remote Phonebook" priority="3" enable="1" /> <item id_name="ldap_search" display_name="LDAP" priority="4" enable="0" /> <item id_name="BroadSoft_directory_search" display_name="Network Directories" priority="5" enable="0" /> </root_super_search> ---------------------------------------------------------------------------------------------------- 3. Then configure the "super_search.url = " in common.cfg,change common.cfg to y000000000028.cfg 4. Upload y000000000028.cfg and super_search.xml to the specific server 5. Then auto-provisioning Hope it can help you. |