+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T20 Action URI doesn1t work FW 9.70.0.168 (/showthread.php?tid=1011)
T20 Action URI doesn1t work FW 9.70.0.168 - Ednaldo - 11-08-2013 07:54 PM
T20 Action URI doesn't work after firmware updated to 9.70.0.168.
In the previous version (9.61.0.85) the action URI works just fine.
Code:
admin:admin@192.168.0.XX/cgi-bin/ConfigManApp.com?number=NUMBER&outgoing_uri=9518@192.168.0.XXRE: T20 Action URI doesn1t work FW 9.70.0.168 - Yealink Support - 11-12-2013 11:30 AM
Hi Ednaldo,
In the V70, you need to change the action URI syntax.
http://IP address of phone/cgi-bin/ConfigManApp.com?key= variable value
And you also need to enable IP address of remote control.
1. Click on Phone->Features->API Security>>.
2. Enter the IP address or any in the Trusted Action URI Server List field.
Multiple IP addresses are separated by comma. If you set the field to “any”, the IP
phone receives and handles HTTP GET requests from any IP address. If you leave
the field blank, the IP phone cannot receive or handle any HTTP GET request.