Setting DNS SRV from cero - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: Setting DNS SRV from cero (/showthread.php?tid=1003) |
Setting DNS SRV from cero - Maradona - 11-06-2013 11:58 PM Hi, im new in this forum. I'm setting the DNS SRV in T20P ipphone model, however in the link http://www.yealink.com/Upload/document/UsingDNSSRVFeatureonYealinkPhones/UsingDNSSRVFeatureonYealinkSIPT2XPPhonesRev_610-20595545425.pdf there is only a brief help, but my question is, where have i to set two ip address in order to point them to server name? The help only shows the setting of 'Transport = DNS SRV', but I need to set two IP address with 'redundancy Fail-over'. Is possible to use only IP addres, rather server name? Thank you for the answer, Eric Alarcón RE: Setting DNS SRV from cero - Yealink Support - 11-11-2013 11:03 AM Hi Maradona, If you want to only use IP address, you can choose UDP as transport type and fill you two IP address in SIP Server Host. We have added redundancy Fail-over server feature in Account' setting in version 71. |