+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G: Power LED always flashing when backlight is off (/showthread.php?tid=34805)
RE: T46G: Power LED always flashing when backlight is off - Louis6321 - 03-24-2017 01:22 PM
Travis, I just had a look at the screenshot you attached. Can you explain what the two settings mean please?
RE: T46G: Power LED always flashing when backlight is off - Travis_Yealink - 03-24-2017 03:42 PM
(03-24-2017 01:22 PM)Louis6321 Wrote: Travis, I just had a look at the screenshot you attached. Can you explain what the two settings mean please?
Hi,
If you set as the screenshot, the power saving LED light will be turn off, and if you set 100 on these two options both, the light will light for 100ms and dark for 100ms, if you set them 0 both, the LED light will always ON, is it clear enough for you?
regards,
Travis
RE: T46G: Power LED always flashing when backlight is off - Louis6321 - 03-24-2017 03:54 PM
(03-24-2017 03:42 PM)Travis Wrote: If you set as the screenshot, the power saving LED light will be turn off, and if you set 100 on these two options both, the light will light for 100ms and dark for 100ms, if you set them 0 both, the LED light will always ON, is it clear enough for you?
Perfect, thank you
RE: T46G: Power LED always flashing when backlight is off - Jazzy - 03-26-2017 12:07 PM
(03-24-2017 03:33 AM)Travis Wrote: Dear all,
Really sorry for the inconvenience brought to you.
Yealink already release a new T46G firmware version to fix this issue, please download from below link and have a test:
Since updating my phone the light no longer flashes but the LCD doesn't go completely dark, it seems to still be very faintly lit.. I've not changed any other settings and this wasn't the case with the previous firmware... ideally I would like the phone to be completely dark when in power saving mode..
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 03-26-2017 12:22 PM
Hi Jazzy,
here it works. LED is flashing only on missed calls and new voice messages AND the screen of the phone will go dark on power save mode.
I hope this 3 attachments will help.
[attachment=4235] [attachment=4236] [attachment=4237]
RE: T46G: Power LED always flashing when backlight is off - ike - 03-26-2017 12:44 PM
(03-24-2017 03:33 AM)Travis Wrote: Yealink already release a new T46G firmware version to fix this issue, please download from below link and have a test:Thank you, it works!
RE: T46G: Power LED always flashing when backlight is off - Jazzy - 03-26-2017 12:52 PM
(03-26-2017 12:22 PM)Werner1959 Wrote: Hi Jazzy,
here it works. LED is flashing only on missed calls and new voice messages AND the screen of the phone will go dark on power save mode.
I hope this 3 attachments will help.
Thanks Werner1959, I have the settings the same as you and the LCD it still lit, as I say it's very faint, you can't notice it during the day but at night it's more obvious.. I've attached a picture where you can kind of see it lit up.. [attachment=4238]
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 03-26-2017 01:05 PM
@ Jazzy
Most time I look at the phone during daylight or when in office all the lights are on. In the night I sleep instead of regarding phones
Perhaps sometime I should regard the display of the phone in the night and check this out.I do not really know and I did not tested it, but perhaps setting "Unused BackLight" from "low" to "off" or setting "Active Backlight Level" to a lower level will bring better result for you?
RE: T46G: Power LED always flashing when backlight is off - Travis_Yealink - 03-28-2017 03:05 PM
Dear all,
The development of all models were done.
Please download the new firmware x.81.0.71 from below link:
http://ftp.yealink.com/?ShareToken=E6C4D18C5E1D09B9C1532DCE058971092C94481D
If anything I can help, pls feel free to let me know.
Regards,
Yealink_Travis
RE: T46G: Power LED always flashing when backlight is off - Louis6321 - 03-28-2017 03:07 PM
(03-28-2017 03:05 PM)Travis Wrote: Dear all,
The development of all models were done.
Please download the new firmware x.81.0.71 from below link:
http://ftp.yealink.com/?ShareToken=E6C4D18C5E1D09B9C1532DCE058971092C94481D
If anything I can help, pls feel free to let me know.
Regards,
Yealink_Travis
Woooooo. Thanks Travis!
It's working perfectly on T48G with 0 light time and 3000 dark time (I left it as 3000 because that's the default).
Thanks again.