Yealink Forums

I have set up a W52P with 25.30.0.20 firmware and configured time zone for -5 US Eastern and enabled Daylight Saving Time.

The DST offset (minutes) field needs to be set to 60, but it reverts to 59 for any number higher than 59. This results in the clock always being a minute off during DST.

Is this a firmware issue or am I missing something?

Hi Jmac,
Sorry for this, let me check with our R&D why the value can't up to 60

Hi Jmac,
We fixed offset time issue in below new firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir...0.0.28.rom
Any test result please let us know.
Thanks.

(06-17-2013 02:30 PM)Yealink Support Wrote: [ -> ]Hi Jmac,
We fixed offset time issue in below new firmware:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir...0.0.28.rom
Any test result please let us know.
Thanks.

I installed the new firmware and it now works correctly. Thanks.

Thanks~