09-14-2023, 07:02 PM
Good Day,
Hope someone can assist me please.
Currently have T46U running firmware version 108.86.0.70 with a EXP43 connected to it.
The client would like the BLF list to populate on the exp module first and then the line keys. Currently have the below configured in the template file to change the priority sequence to exp > line key but the contacts are still populating on the line keys. Is there additional changes required to enable this?
All of the below are set to 1
-bw.directory_enable = 1
-phone_setting.blf_list_enable = 1
-phone_setting.auto_blf_list_enable = 1
-phone_setting.blf_list_sequence_type = 1
Side Note: BLF list is being sent from BroadSoft
Thanks
Hope someone can assist me please.
Currently have T46U running firmware version 108.86.0.70 with a EXP43 connected to it.
The client would like the BLF list to populate on the exp module first and then the line keys. Currently have the below configured in the template file to change the priority sequence to exp > line key but the contacts are still populating on the line keys. Is there additional changes required to enable this?
All of the below are set to 1
-bw.directory_enable = 1
-phone_setting.blf_list_enable = 1
-phone_setting.auto_blf_list_enable = 1
-phone_setting.blf_list_sequence_type = 1
Side Note: BLF list is being sent from BroadSoft
Thanks