Hi
We have an issue with a W70B base with W73H handset where it keeps saying data initialising
The handset and base are fully up to date on the firmware and the handset is not miles away, probably a couple of meter away so not a distance thing
Can anyone advise?
Thanks
(08-30-2023 06:23 PM)glennbtn Wrote: [ -> ]Hi
We have an issue with a W70B base with W73H handset where it keeps saying data initialising
The handset and base are fully up to date on the firmware and the handset is not miles away, probably a couple of meter away so not a distance thing
Can anyone advise?
Thanks
Hi Glennbtn,
Please kindly confirm if the W73H handset is displayed as registered on the web interface of the W70B base. The "data initialising" indicates that it is attempting to connect to the base, however frequently showing this indicates connection unstable between the handset and the base.
Thanks.
Best Regards,
Regend Soh | Sr. Sales Engineer | Yealink
Having same issue with W70B and W73H handset. Updated firmware for both handset and base to latest 3cx version. Is this signs of a base going bad? Do I just need to re-register the handsets? Any one resolve this?
(09-04-2023 01:51 PM)Regend_Yealink Wrote: [ -> ] (08-30-2023 06:23 PM)glennbtn Wrote: [ -> ]Hi
We have an issue with a W70B base with W73H handset where it keeps saying data initialising
The handset and base are fully up to date on the firmware and the handset is not miles away, probably a couple of meter away so not a distance thing
Can anyone advise?
Thanks
Hi Glennbtn,
Please kindly confirm if the W73H handset is displayed as registered on the web interface of the W70B base. The "data initialising" indicates that it is attempting to connect to the base, however frequently showing this indicates connection unstable between the handset and the base.
Thanks.
connections game
Best Regards,
Regend Soh | Sr. Sales Engineer | Yealink
That's right. I also had this problem before and my connection was unstable. After a while, I replaced the base and the connection was stable again. You have a very precise perspective
(03-22-2024 12:31 PM)itemgarage Wrote: [ -> ] (09-04-2023 01:51 PM)Regend_Yealink Wrote: [ -> ] (08-30-2023 06:23 PM)glennbtn Wrote: [ -> ]Hi
We have an issue with a W70B base with W73H handset where it keeps saying data initialising
The handset and base are fully up to date on the firmware and the handset is not miles away, probably a couple of meter away so not a distance thing
Can anyone advise?
Thanks
Hi Glennbtn,
Please kindly confirm if the W73H handset is displayed as registered on the web interface of the W70B base. The "data initialising" indicates that it is attempting to connect to the base, however frequently showing this indicates connection unstable between the handset and the base.
Thanks.
connections game
Best Regards,
Regend Soh | Sr. Sales Engineer | Yealink
That's right. I also had this problem before and my connection was unstable. After a while, I replaced the base and the connection was stable again. You have a very precise perspective
Hi
Glad to hear that it works for you!
Best Regards,
Regend Soh | Sr. Solution Engineer | Yealink