10-01-2022, 04:24 PM
We currently have Yealink T54s configured with a single line (position 1 on the display)and 8 BLFs associated with inbound sales campaigns (positions 2 through 9 on the display). We need to configure an additional 9 lines for outbound calls and have them displayed on "page 2" of the T54's display. If I configure it that way in the provisioning system in my switch (Fusionpbx) using lines 11 through 19, it drops lines 17, 18, and 19 (doesn't provision/display them) because the T54 only wants to use positions 1 through 16 for actual extensions.
The purpose is to allow the sales people to make an outbound call to a client using a specific extension that has a phone number in the call recipient's area code, but with these extensions displayed on the 2nd page of the Yealink display. Is there a way to get extensions configured in positions 17, 18, and 19 (or any other position for that matter)?
The purpose is to allow the sales people to make an outbound call to a client using a specific extension that has a phone number in the call recipient's area code, but with these extensions displayed on the 2nd page of the Yealink display. Is there a way to get extensions configured in positions 17, 18, and 19 (or any other position for that matter)?