Yealink Forums

I am having an issue getting a T32/T38 config file to generate properly with 3CX v11 SP4. Here's what I've done.

I have taken the stock T32/T38 template and copied it to a new template called "T32/T38 - Custom". The only settings I have changed in this template are the wallpaper settings. I have left the stock locations and simply changed the name of the .png from yealinkt32.png to yealinkt32custom.png. When I generate a new config with the custom template it does not populate any of the three wallpaper settings.

Here are the three settings in the template that were modified:


And here is the settings in the generated config file. As you can see they are blank.


Any ideas?

Hey Seth
I just replaced the png file with a new one... with the same name.
You didn't mention what firmware... I have 1 phone right now running 38.70.0.143 and this is what I find in the cfg file for that device:


and this is what I have in 3cx:

Seems to be working ok. just fior the heck of it - maybe try a shorter file name? send me your file if you want, and I will try creating a new template and see what happens...

Oh - and I just caught this - be sure to change the model of the phone within the template (like 6 or 8 places) to match the name and model at the top:

Hey, what's up man, long time no talk?

The problem with just replacing the stock image is that opens the doors for 3CX overwriting it down the road, same reason why you modify a copied template and not the original, it will eventually get overwritten by a service pack.

It may be a length issue now that you mention it, because originally I had yealinkt32-custom.png as the name and I couldn't even upload that to the phone manually until I removed the hyphen, so it's obviously picky. What's weird about that though is if you look at the stock wallpapers they have special characters in them "pictures (01)".png.

(05-16-2013 06:16 AM)craigreilly Wrote: [ -> ]Hey Seth
I just replaced the png file with a new one... with the same name.
You didn't mention what firmware... I have 1 phone right now running 38.70.0.143 and this is what I find in the cfg file for that device:

Code:

################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######


################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######

wallpaper_upload.url = http://10.0.0.12:5000/provisioning/logo/yealinkt38.png
screen_saver.pic.url = http://10.0.0.12:5000/provisioning/logo/yealinkt38.png


#Configure the phone background.
#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png
#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png



phone_setting.backgrounds = Config:yealinkt38.png

and this is what I have in 3cx:

Code:

################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######
{IF model=Yealink T32}
wallpaper_upload.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt32.png
screen_saver.pic.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt32.png
{ENDIF}

################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######
{IF model=Yealink T38 v70}
wallpaper_upload.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt38.png
screen_saver.pic.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt38.png
{ENDIF}

#Configure the phone background.
#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png
#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png
{IF model=Yealink T32}
phone_setting.backgrounds = Config:yealinkt32.png
{ENDIF}

{IF model=Yealink T38 v70}
phone_setting.backgrounds = Config:yealinkt38.png
{ENDIF}

Seems to be working ok. just fior the heck of it - maybe try a shorter file name? send me your file if you want, and I will try creating a new template and see what happens...

Oh - and I just caught this - be sure to change the model of the phone within the template (like 6 or 8 places) to match the name and model at the top:



I also uploaded my working template... filename is not custom... but check to ensure "model" is replaced everywhere. I found strange issues here.

(05-16-2013 06:42 AM)craigreilly Wrote: [ -> ]I also uploaded my working template... filename is not custom... but check to ensure "model" is replaced everywhere. I found strange issues here.

This was exactly it. Every field that referenced the old model name (the default Yealink T32) was not getting populated because it didn't match. Thanks.