Yealink Forums

Full Version: W52P 2 handsets
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi
we were recently provided with the w52p phone system with 2 handset and a base . Both handsets have been registered with the base and the phone system has been setup by our broadband supplier Bonline. So the problem is the 2nd handset will not allow calls out, although the handset can receive calls . When i contacted Bonline they said that we will require a second base unit as we only have 1 line??? Is this correct if so why supply 2 handsets with 1 base?
(06-01-2021 06:40 PM)DAZZLING Wrote: [ -> ]Hi
we were recently provided with the w52p phone system with 2 handset and a base . Both handsets have been registered with the base and the phone system has been setup by our broadband supplier Bonline. So the problem is the 2nd handset will not allow calls out, although the handset can receive calls . When i contacted Bonline they said that we will require a second base unit as we only have 1 line??? Is this correct if so why supply 2 handsets with 1 base?

Hi,

After the handset is registered to the base station, you can assign one or more outgoing lines or incoming lines for the handset.

The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned to the handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line of the handset.

The handset can only receive incoming calls of the assigned incoming line(s). You can assign incoming lines to all handsets that registered to the same base station on your handset.

To assign the incoming line of the handset via web user interface:
1. Click on Account -> Number Assignment.
2. To assign incoming lines, to check the desired account from Line No.&Name field to the corresponding handset in the Handset No. field.

To assign the outgoing line of the handset via web user interface:
1. Click on Account -> Number Assignment.
2. To assign outgoing lines, to check the desired account from Line No.&Name field to the corresponding handset in the Handset No. field.
3. Select the desired default outgoing line number from the pull-down list of corresponding Default.

Hope this will help.
Reference URL's