Yealink Forums

Full Version: LDAPS
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello!
There are telephones:
IP Phone SIP-T19P E2 - firmware 53.84.0.125
IP Phone SIP-T46S - firmware 66.85.0.5
DECT Base for W52P and W56P - firmware 25.81.0.60
DECT Base W60B - firmware 77.83.0.85
LDAPS contacts do not work on phones: IP Phone SIP-T19P E2, IP Phone SIP-T46S, DECT Base for W52P and W56P. Everything works with the LDAP protocol.
On DECT Base W60B via LDAP (S) contacts work.

Syslog с SIP-T19P E2:
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > LDAP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
192.168.xxx.xxx 11/08 13:55:44.682
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > LDAP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
192.168.xxx.xxx 11/08 13:55:44.684
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > ANY =3
192.168.xxx.xxx 11/08 13:55:44.687
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > MEM =3
192.168.xxx.xxx 11/08 13:55:44.691
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > LDAP =3
192.168.xxx.xxx 11/08 13:55:44.693
<131>Aug 11 13:55:44 GUI [1309:1348]: LDAP<3+error > bind error at "ldap_sasl_bind_s": -1
192.168.xxx.xxx 11/08 13:55:44.713
The issue has been resolved. The problem was solved by switching to the Device Certificates tab Device Certificates in Customs Certificates.
Glad to hear you were able to find the issue.
Reference URL's