In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
(06-04-2020 12:00 PM)michele-scapini Wrote: [ -> ]In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
(06-04-2020 01:48 PM)complex1 Wrote: [ -> ] (06-04-2020 12:00 PM)michele-scapini Wrote: [ -> ]In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
yes of course, if i set ring only in headset it works
(06-04-2020 02:01 PM)michele-scapini Wrote: [ -> ] (06-04-2020 01:48 PM)complex1 Wrote: [ -> ] (06-04-2020 12:00 PM)michele-scapini Wrote: [ -> ]In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
yes of course, if i set ring only in headset it works
Hi,
Please reset the phone to factory default, re-provisiong and try again.
(06-04-2020 02:59 PM)complex1 Wrote: [ -> ] (06-04-2020 02:01 PM)michele-scapini Wrote: [ -> ] (06-04-2020 01:48 PM)complex1 Wrote: [ -> ] (06-04-2020 12:00 PM)michele-scapini Wrote: [ -> ]In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
yes of course, if i set ring only in headset it works
Hi,
Please reset the phone to factory default, re-provisiong and try again.
i have this problem with 4 phones (all T46S) in 2 customers and with 2 model of headset (the plantronics and jabra)