Can I do Auto Answer on DD10K/Line2 but NOT line1?
Line1 is the base - which is a T54 that has the DD10K USB DECT adapter. The cordless W53H are using line2, line3, and line4 registration off of the T54W.
I want to insert the below config on line2, 3, and 4, but NOT on line1 (the T54W)
Code:
auto_provision.handset_configured.enable=1
custom.handset.auto_intercom = 2
Our pbx does have a w52p.cfg and a w60p.cfg, but not a w53h.cfg for the handset.
I can't use MAC-ADDRESS.cfg, because the phone only uses one MAC-ADDRESS.cfg in our pbx - the MAC of the T54W.
Or should I ask in the T5X forum?
(09-30-2019 04:47 PM)justingoldberg Wrote: [ -> ]Can I do Auto Answer on DD10K/Line2 but NOT line1?
Line1 is the base - which is a T54 that has the DD10K USB DECT adapter. The cordless W53H are using line2, line3, and line4 registration off of the T54W.
I want to insert the below config on line2, 3, and 4, but NOT on line1 (the T54W)
Code:
auto_provision.handset_configured.enable=1
custom.handset.auto_intercom = 2
Our pbx does have a w52p.cfg and a w60p.cfg, but not a w53h.cfg for the handset.
I can't use MAC-ADDRESS.cfg, because the phone only uses one MAC-ADDRESS.cfg in our pbx - the MAC of the T54W.
Or should I ask in the T5X forum?
Hi,
The W53H use the account settings which are configured in the T54W.
If the T54W has a second, third, forth account then the W53H can connect to one of this accounts.
You have to edit/modified the T54W provisioning template to accomplish what you have in mind.
Hope this will help.
Correct. Yet, I don't want it to apply to the T54W.
(10-01-2019 08:53 AM)complex1 Wrote: [ -> ] (09-30-2019 04:47 PM)justingoldberg Wrote: [ -> ]Can I do Auto Answer on DD10K/Line2 but NOT line1?
Line1 is the base - which is a T54 that has the DD10K USB DECT adapter. The cordless W53H are using line2, line3, and line4 registration off of the T54W.
I want to insert the below config on line2, 3, and 4, but NOT on line1 (the T54W)
Code:
auto_provision.handset_configured.enable=1
custom.handset.auto_intercom = 2
Our pbx does have a w52p.cfg and a w60p.cfg, but not a w53h.cfg for the handset.
I can't use MAC-ADDRESS.cfg, because the phone only uses one MAC-ADDRESS.cfg in our pbx - the MAC of the T54W.
Or should I ask in the T5X forum?
Hi,
The W53H use the account settings which are configured in the T54W.
If the T54W has a second, third, forth account then the W53H can connect to one of this accounts.
You have to edit/modified the T54W provisioning template to accomplish what you have in mind.
Hope this will help.