Yealink Forums

Full Version: Change Display Name of Line on Handset
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
By our SIP provider we have cryptic Register and User Name (same).

How can handset be configured that selecting lines shows label and not register name?
(01-29-2019 10:23 PM)Libertis Wrote: [ -> ]By our SIP provider we have cryptic Register and User Name (same).

How can handset be configured that selecting lines shows label and not register name?

Hi,

Please go to the Web UI > Features > General Information > Display Method on Dialing, choose Label and save the configuration.
Then the Line Status will show the Label instead of the User Name.

Hope this will help.
Thank you, but on our latest firmware of W60B there is no such line, which I searched already before?

(02-28-2019 09:01 AM)complex1 Wrote: [ -> ]Hi,

Please go to the Web UI > Features > General Information > Display Method on Dialing, choose Label and save the configuration.
Then the Line Status will show the Label instead of the User Name.

Hope this will help.
(02-28-2019 11:54 AM)Libertis Wrote: [ -> ]Thank you, but on our latest firmware of W60B there is no such line, which I searched already before?

(02-28-2019 09:01 AM)complex1 Wrote: [ -> ]Hi,

Please go to the Web UI > Features > General Information > Display Method on Dialing, choose Label and save the configuration.
Then the Line Status will show the Label instead of the User Name.

Hope this will help.

Hi,

If you are running version 83.10 it should be there.
See Admin Guide on page 93
http://download.support.yealink.com/down...sr87weEv7t
We have firmware 77.83.0.25

http://support.yealink.com/documentFront...mentId=206

Your link isn't working, do you refer to 'Yealink W60P DECT IP Phone Administrator Guide_V81_31.pdf'?

(02-28-2019 12:36 PM)complex1 Wrote: [ -> ]Hi,

If you are running version 83.10 it should be there.
See Admin Guide on page 93
http://download.support.yealink.com/down...sr87weEv7t
(02-28-2019 01:00 PM)Libertis Wrote: [ -> ]We have firmware 77.83.0.25

http://support.yealink.com/documentFront...mentId=206

Your link isn't working, do you refer to 'Yealink W60P DECT IP Phone Administrator Guide_V81_31.pdf'?

(02-28-2019 12:36 PM)complex1 Wrote: [ -> ]Hi,

If you are running version 83.10 it should be there.
See Admin Guide on page 93
http://download.support.yealink.com/down...sr87weEv7t

No, I was referring to
Yealink W53P & W60P & W41P DECT Phones Administrator Guide_V83_10.pdf
SOLVED

Thank you very much, found it, also on latest firmware.

Sorry, browser search was set to match words on CTRL-F, shows red unless it finds full word 'display', lazy I am, I stopped typing at 'disp' - good that is solved too :-)

(02-28-2019 04:15 PM)complex1 Wrote: [ -> ]No, I was referring to
Yealink W53P & W60P & W41P DECT Phones Administrator Guide_V83_10.pdf
Glad to see the issue has been resolved now and thank you for updating the thread.
Reference URL's